Specification: 1g-1000g
Montmorillonite desiccant is described as irregular crushed granules of a kindof naturally occurring mineral with gray or gray-red appearance, and has strongmoisture absorption ability. It is environment friendly, nontoxic andtasteless, has no damage to human bodies, and is 100% degradable; The producthas good adsorption performance at room temperature and general humidity, andhas the effects of active adsorption, static humidity reduction, odor removaland the like; Non-corrosive in contact with metal and conforms to the NationalStandard GJB2714-96 and the US Specification MIL3464E.
Component | Ratio | Component | Ratio |
SiO2 | 66.78 | CaO | 4.42 |
AL2O3 | 18.42 | K2O | 0.25 |
Fe2O3 | 9.71 | Na2O | 0.42 |
S/N | Item | Reference standards |
1 | Qualified size | 96% |
2 | Mass weight (g/ml) ≥ | 900-950 |
3 | Particle diameter (D mm) | 1.0-4.0 |
4 | PH Value | 6.5-7.5 |
5 | Moisture content (%) ≤ | 1.0 |
1. Putthe Montmorillonite desiccant and the product to be protected into a packing bag,and then just seal it (very important).
2. Afterthe above step, the remained product shall be sealed as soon as possible forfear of bad effect. This product shall not be exposed in the air for more than2h.
3. Theused amount for the product to be protected is dependent on its material,packing space, storage conditions (e.g. temperature and humidity) and thecompactness of the packing material.
4. Montmorillonite desiccant is nontoxic but inedible,
